Products - EIFS

EPS Molders Inc. supplies quality expanded polystyrene (EPS) insulation sheet goods and EIFS products to all aspects of the construction and stucco industries.   EIFS is used under stucco to improve water resistance and insulation of buildings (Commercial and Residential).

In addition to standard EPS for EIFS, we supply:

  • Rainboard – A specific type of EIFS that is grooved to promote the movement of water from between the building outer shell and the insulation.
  • Starter Strips and Custom Mouldings

Our EIFS related products include:

  • 24″ x 48″ flat board to variance of +/- 1/16″ width and dimensions
  • Standard industry bagging in UV rated 24″x24″x48″ EPS Molders logo bags
  • 1.5″ (16pcs), 2.0″ (12pcs), 3.0″ (8 pcs), 4.0″ (6 pcs), 6.0″ (4pcs), & custom thicknesses available
  • Specification flat stock mechanically grooved with vertical backside drainage channels
  • Rainboard uses a 3.25″ groove x 2.25″ ridge pattern to ensure positive drainage without alignment
  • Groove depth of 0.25″ matches the current depth used and accepted for most commercial designs
  • 1.5″ (16pcs), 2.0″ (12pcs), 3.0″ (8 pcs), 4.0″ (6 pcs), 6.0″ (4pcs), & custom thicknesses available
  • Available in standard EIFS thicknesses with single or double wrap offset
  • Typical 4.0″, 6.0″ and 8.0″ width for 1.5″ thru 6.0″ thickness products
  • Drip edge, angle top, round edge, or other custom profile starters available on request
  • Cut from 48″w x 36″t x 97″ long blocks – piece volume as possible based on profile
  • Also offered are profiles offered in per block pricing for all projects
  • Cut from 48″w x 36″t x 97″ long blocks – piece volume as possible based on profile
  • In house design, optimization and production provides best value and combined shipping

Contact our sales team at 780-477-2377 or by email at orderdesk@epsmolders.ca to get a quote for your project today!


EIFS | EPS Molders

 


EIFS | EPS Molders